Colorcom is a global leader in industrial chemical manufacturing and is continuously innovating and transforming to exceed client expectations and industry standards.

Colorcom prides itself on superior customer and technical focus, while focusing on support, developing and manufacturing superior colorants and specialty chemicals. All of our industrial chemical manufacturing is executed to enhance the performance, appeal and processing of a broad range of products used in various industries and consumer - based applications.

The competitive advantages of Colorcom international as your business partner or supplier:

1.Established manufacturer.
2.Current ISO certified; REACH registered.
3.Track record of quality, Lot to lot consistency.
4.Zero defect, Return policy.
5.Sufficient inventory.
6.Wide product portfolio, A great choice of shades.
7.Joint product development.
8.Total innovative solutions for every industry of the specific requirements.
9.Open dialogue and communication channels.
10.Long term commitment to meet or exceed the expectations of customers.
11.Competitive pricing, Optimistic margin.
12.Providing efficient service which is second to none.
13.Constantly changing industry requirements for innovative, fully customized products and solutions.
14.Consistent color performance, adaptability, flexibility and customization.
15.26 years of chemical industry knowledge and experience.
16.Colorcom makes every effort to better serve the global customers,We create and bring the best values to you.

Common name: CL306 boiler repair special high temperature wear corrosion resistant coatings

Category:Abrasion wearresistant coating

Appearance: Paste 

Brand Name: Colorcom

Shelf Life: 2 Years

Place of Origin: China

Product Specification:

Product Description:
CL306 high temperature resistant energy conservation coating is compounded by modified inorganic bonding adhesive and modified organic adhesives with the help of additional agent,use nano ceramics hollow beads,silicon-aluminum fiber,high temperature resistant solution and various reflecting material as the main raw material,the heat conductivity coefficient is only 0.03W/m.K,the range of temperature resistant is -60-1200 degree,it can restrain and shield radiant heat of infrared ray and the conduction for quantity of heat.Heat insulation inhibition efficiency can reach to about 90%,can restrain thermal radiation of high temperature object and heat loss which caused by heat conduction.

Usage:

1.Surface treatment: Do coarsening treatment on the pending-repair part,(sand blasting treatment will get the best effect,if it doesn't have sand blasting condition,
can do grinding treatment with angle grinder),the surface after coarsening treatment should be cleaned by cleaning agent (can use acetone,ethyl acetate etc.),then dry it by airing,the surface after this treatment should be the coarsening, clean and fresh metal substrates.

(Make the special undercoat of CL709 impact & wear resistant coating mix uniformly according to specified percentage,and brush coating on the substrate surface,then wait for the undercoat curing)

2.Preparation: After undercoat fully curing,according to the specified ratio,make A and B component of CL709 impact & wear 
resistant coating mix uniformly,and use it up within 30 min.Generally it’s while construction and configuration.
Every time the most configuration quantity is not more than 5Kg,every time configure too much adhesives,the curing speed is fast,
hasn't been used up until the adhesive has already partial cured and can't be used.

3.Coating: The suitable coating thickness of CL709 is 3~10mm,make the mixed-up material be coating on the undercoat surface,the adhesive layer should be compacted.Repair the surface to be smooth after the coating is coated on the required size.

4.Curing condition:It(the equipment) can be put into using after curing for 24 hours at room temperature of 25 degree,it(the equipment)can also be put into using after this operation of initial curing for 2 hours at room temperature of 25 degree,then heat it up to the temperature
of 100 degree and keep this temperature for 2-3 hours,after that cooling it down to room temperature 25 degree,in this way,it can improve 30% comprehensive performance. If the temperature is below 10 degree,should heat it up or prolong curing time to promote the curing.
General construction in winter,can use iodine tungsten lamp do irradiation heating with 40cm distance from the coating.

Application: 

Used in the partial repairing and whole protecting under the working condition of the equipment which has higher wear & impact resistant requirements.Such as:power plant coal transportation system transflux part,all coal washery transflux part,mining transport,separation system etc.Especially suitable for moist or underwater environment,avoid using in high temperature transportation system.Such as:slurry agitation tank,agitator blade,magnetic separator roller,belt conveyor roller,centrifuge,vibrating screen girder propping,ball mill end cover,chute,pipeline,elbow etc.

Package: Packed in a plastic drum, 20Kg/drum, two component, A component: 16Kg/drum, B component: 4Kg/drum.

Storage: Sealed in dry, room temperature.

Executive Standards: International Standard.