Colorcom is a global leader in industrial chemical manufacturing and is continuously innovating and transforming to exceed client expectations and industry standards.

Colorcom prides itself on superior customer and technical focus, while focusing on support, developing and manufacturing superior colorants and specialty chemicals. All of our industrial chemical manufacturing is executed to enhance the performance, appeal and processing of a broad range of products used in various industries and consumer - based applications.

The competitive advantages of Colorcom international as your business partner or supplier:

1.Established manufacturer.
2.Current ISO certified; REACH registered.
3.Track record of quality, Lot to lot consistency.
4.Zero defect, Return policy.
5.Sufficient inventory.
6.Wide product portfolio, A great choice of shades.
7.Joint product development.
8.Total innovative solutions for every industry of the specific requirements.
9.Open dialogue and communication channels.
10.Long term commitment to meet or exceed the expectations of customers.
11.Competitive pricing, Optimistic margin.
12.Providing efficient service which is second to none.
13.Constantly changing industry requirements for innovative, fully customized products and solutions.
14.Consistent color performance, adaptability, flexibility and customization.
15.26 years of chemical industry knowledge and experience.
16.Colorcom makes every effort to better serve the global customers,We create and bring the best values to you.

Common name: CL66 crusher lining plate filled material epoxy adhesive backing compound

Category:Abrasion wear resistant coating

Appearance: Fluid

Brand Name: Colorcom

Shelf Life: 2 Years

Place of Origin: China

Product Specification:

Polyurethane modified epoxy material,two component ,red fluid              
Color: A component: light red, B component: light yellow
Viscosity: A component: 1000, B component: 700mPa.s(GB/T2791-1995)
Density:A component: 1.5, B component: 1.06g/cm3 (GB/T13354-1992)
Compressive strength after curing:130 Mpa (GB/T2791-1995)
Shear strength after curing:10.1 Mpa (GB/T7124-1996)
Hardness after curing:Shore A90 (GB/T2144-1980)
Shrinkage ratio after curing: 0.01%
Cooperation ratio(A : B),weight ratio 5:1,volume ratio  3.2:1
Pot life:15 min

The shortest curing time before operation:24h
Operation temperature:5℃-30℃
The temperature resistant after curing:-60℃-100 ℃
 Impact resistant test:Using 50 tons air hammer to hammer the φ50 stone for 5 times,the stone is not dehiscent.

Product Description:
CL66 crusher filling material (backing adhesives)  is used in the filling/supporting between crusher lining plate and substrates,gravel barrels and jacket clearance,support cone and protective layer space,at the same time it can be used as buffer material,when the equipment suffers impacting or load vibration from broken ore, also used in the structural reinforcement,impact resistant vibration of ball mill wear resistant lining plate and cylinder clearance.

Usage:

1.Cleaning up and preparation:  clean up the residual filling material on the surface of the cone, as well the grease dirt and smudge on the areas where touched with the adhesive,then fit up the cone and lining plate.Seal up the cone/lining plate fitting surface and annular ring with the adhesive tape etc,for fear of adhesive leakage,and protect the screw threads on the shafts if necessary,try to construct under the temperature of 5℃-30 ℃ during using.
2.Configure adhesive: Make the blender fix on low speed electric hand drill,Open the A component of CL66 crusher filling material,stir it for 1 minute,then pour the B component into the A component drum at the same time stir it with the electric blender,it's OK for color uniform,general stirring time is not more than 4 minutes.
Operation time: The total time from start mixing to finish filling is not more than 15 minutes(the data for 20℃)
3.Pouring:  Make the mixed-up CL66 adhesive solution pour into it along the cone or a place of lining plate crack,easy to exhaust,in necessity,can make a cofferdam guide with plasticine etc,until overflow from the top of crack.Don’t pour into the adhesive without mixing uniformly(with different colors)
4.Curing: Place to cure for 12-24 hours,the temperature makes a big difference for the curing time,the curing speed is fast for high temperature,it can put into using to cure for 24 hours. 

Application: Coating

Package: Two components,20Kg/group,packed in a iron drum.

Storage: Sealed in dry, room temperature.

Executive Standards: International Standard.